Non Coated Non Coated Non Coated Non Coated

Non Coated

Products&Services

Service Centers product range

LAMITAL

PRODUCTS AND SERVICES

  • Galvanized, thin thickness from 0.3mm to 3.00mm (0.01”x 0.1”)
    Quality: DX51D
    Microperforated Brilliant Surface MA Type
    Skinpassed Surface MB Type
    Coverings Z100-Z140-Z200-Z275-Z600-Z725
    Coils up to 1500mm(59”) maximum width
    Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
    Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
    Cut to length sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
    Blankets, minimum dimension 350mm (14”)
    Possibility of adding protective film up to 1500mm (59”) wide
  • Pre-coated, thickness 0.45mm, 0.6mm, 0.8mm, 1.5mm, 2.00mm (0.17”, 0.02”, 0.03”, 0.6”, 0.8”)
    Testa di Moro colour (C73) e Bianco Grigio Colour (C17)
    1 or 2 sides
    Coils up to 1500mm (59”) maximum width
    Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
    Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
    Cut to lenght sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
    Blankets, minimum dimension 350mm (14”)
    Possibility of adding a protective film up to 1500mm (59”) wide
  • Aluzinc (custom order only), thickness from 0.4mm to 3.00mm (from 0.06″ to 0.12″)
    With or without Easyfilm
    Coils up to 1500mm (59”) maximum width
    Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
    Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
    Cut to lenght sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
    Blankets, minimum dimension 350mm (14”)
    Possibility of adding a protective film up to 1500mm (59”) wide
  • Magnelis (custom order only), thickness from 0.4mm to 3.00mm (from 0.06″ to 0.12″)
    Coils up to 1500mm (59”) maximum width
    Strips from 25mm (1″) minimum width up to 1500mm (59”) maximum width
    Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
    Cut to lenght sheets, maximum width up to 1500mm (59”) and length upt to 4990mm (196”)
    Blankets, minimum dimension 350mm (14”)
    Possibility of adding a protective film up to 1500mm (59”) wide
  • Anti drop
    Application of anti fog materials on galvanized support
    Coils up to 1500mm (59”) maximum width
    Sheets in commercial size 1000x2000mm (40”x79”), 1250x2500mm (49”x98”), 1500x3000mm (59”x118”)
    Cut to length sheets, maximum width up to 1500mm (59”) and length up to 4990mm (196”)
    Blankets, minimum dimension 350mm (14”)

LAMFER

PRODUCTS AND SERVICES

NARROW STRIPS, LARGE STRIPS, STRIPS, METAL SHEETS
Cut from 3.00x1500mm (0.04”x59”) longitudinal cutting lines and from flattening lines with longitudinal/cross sectional cut of 3.00x1500mm (0.04”x59”)
The products in the above category are:

  • Cold rolled, thickness from 0,3mm a 2,99mm
    Quality: DC01 – DC03 – DC04 – DC05 – DC06
    MB controlled aspect and finishes for particular details to be varnished.
    Quality: DC01 EK – DC04 EK – DECARBONIZED (SOLFER/UNISMALT) for traditional Enameling with both hands, through dust and direct with one hand
  • Hot rolled pickled steel, thickness from 1.5mm a 3.00mm (from 0.06”to 0.04”)
    Quality: DD11 – DD12 – DD13 – HIGH PERFORMANCE (S 240 MC – S 420 MC – S 500 MC)
  • Electrogalvanized 25/25
    a) Cold rolled support, thickness from 0.36mm a 2.99mm (from 0.01” to 0.12”)
    Quality: DC01 – DC03 – DC04 – DC05 – DC06
  • Aluminized, thickness from 0.40mm to 2.00mm (from 0.16” to 0.08”)
    Quality: DX51D – DX52D – DX53D – DX54D
    Covering: 80 – 100 – 120 gr/mq

Lamital and Lamfer are able to offer on all products restricted tolerances on width, length, squaring off and flatness.